Section 64 (3.5L Engine (Service Information)): Specifications: Torque
WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Camshaft Sprocket Bolt-Right Side | 102 +1/4 Turn | 75 +1/4 Turn | - |
| Camshaft Sprocket Bolt-Left Side | 102 +1/4 Turn | 75 +1/4 Turn | - |
| Camshaft Thrust Plate-Bolts | 28 | - | 250 |
| Connecting Rod Cap-Bolts | 27 +1/4 Turn | 20 +1/4 Turn | - |
| Crankshaft Main Bearing Cap | - | - | - |
| -Inner Main Cap Bolts | 20 +1/4 Turn | 15 +1/4 Turn | - |
| -Outer Main Cap Bolts | 27 +1/4 Turn | 20 +1/4 Turn | - |
| -Tie Bolts (Horizontal) | 28 | - | 250 |
| Crankshaft Damper-Bolt | 95 | 70 | - |
| Cylinder Head Bolts* | - | - | - |
| -Step 1 | 61 | 45 | - |
| -Step 2 | 88 | 65 | - |
| -Step 3 | 88 | 65 | - |
| -Step 4 | +1/4 Turn | +1/4 Turn | - |
| *Refer to procedure for tightening sequence. See Engine/Cylinder Head - Installation . | |||
| Cylinder Head Cover-Bolts | 10 | - | 90 |
| Exhaust Manifold to Cylinder Head-Bolts | 23 | - | 200 |
| Exhaust Manifold Heat Shield-Bolts | 12 | - | 105 |
| Flex plate to Crankshaft | 95 | 70 | - |
| Flex plate to Torque Converter | 75 | 55 | - |
| Intake Manifold - Lower | 28 | - | 250 |
| Intake Manifold - Upper | 12 | - | 105 |
| Left Engine Mount to Body Frame Rail | 50 | 37 | - |
| Oil Pan | 27 | 20 | - |
| -M6 Bolts | 12 | - | 105 |
| -M8 Bolts | 28 | - | 250 |
| Oil Pan Drain Plug | 27 | 20 | - |
| Oil Filter | 12 | 9 | - |
| M8 Oil Pump to Block-Bolts | 28 | - | 250 |
| M10 Oil Pump to Block-Bolt | 54 | 40 | - |
| M6 Oil Pump Cover-Bolts | 12 | - | 105 |
| Oil Pump Pick Up Tube-Bolt | 28 | - | 250 |
| Windage Tray | 28 + 90° | 20 + 90° | - |
| Crankshaft Rear Seal Retainer | 12 | - | 105 |
| Right Engine Mount to Body Frame Rail | 50 | 37 | - |
| Rocker Shaft Pedestal Retaining-Bolts | 31 | - | 275 |
| Spark Plugs | 28 | 20 | - |
| Timing Belt Tensioner-Bolts | 28 | - | 250 |
| Timing Belt Tensioner Pulley Assembly-Bolt | 61 | 45 | - |
| Timing Belt Cover | - | - | - |
| -M6 Bolts | 12 | - | 105 |
| -M8 Bolts | 28 | - | 250 |
| -M10 Bolts | 54 | 40 | - |
| Left Engine Mount to Transmission Bracket | 98 | 72 | - |
| Right Engine Mount to Timing Cover/Support Bracket | 98 | 72 | - |