LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Vehicle Theft Security System (Service Information)) >> Standard Procedure >> Transponder Programming >> Secured Access Method

Secured Access Method

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The Secured Access method applies to all vehicles. This method requires the use of a diagnostic scan tool. This method will also require that you have access to the unique four-digit PIN code that was assigned to the original SKREEM. The PIN code must  be used to enter the Secured Access Mode in the SKREEM. This PIN number may be obtained from the vehicle owner, from the original vehicle invoice, or from the Chrysler Customer Center. Refer to the appropriate diagnostic information for the proper Secured Access method programming procedures.

NOTE: The Remote Keyless Entry (RKE) Transmitter will also be programmed during this procedure.
scientia non olet · About LEMON Manuals