LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 40TE Automatic Transmission - GPEC)) >> DTC Troubleshooting >> P0934-Line Pressure Sensor Circuit Low >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
(T854) 5-VOLT SUPPLY CIRCUIT OPEN
(T854) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
(T38) LP VFS SIGNAL CIRCUIT SHORTED TO GROUND
LINE PRESSURE SENSOR
POWERTRAIN CONTROL MODULE (PCM)

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure  .