LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Cooling System & Automatic Transmission Cooling System) >> Engine >> HEATER, Engine Block >> Removal >> 2.7L

HEATER, Engine Block: Removal: 2.7L

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Block Heater
GC0120889Courtesy of CHRYSLER LLC
1 - BLOCK HEATER
2 - ENGINE - RIGHT SIDE
  1. Raise vehicle on hoist.
  2. Detach power cord plug from block heater.
  3. Remove block heater attaching screw located below heater terminals.
  4. Remove block heater from cylinder block.
scientia non olet · About LEMON Manuals