HEATER, Engine Block: Removal: 2.0L/2.4L
WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BLOCK HEATER |
| 2 - POWER CORD |
- Drain cooling system. See Cooling - Standard Procedure .
- Raise vehicle on hoist.
- Detach power cord plug from block heater.
- Loosen screw in center of heater. Remove block heater assembly.