Section 30 (Overhead Console (Service Information)): Removal: Removal
WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Using a suitable tool, release the side locking tabs on the center mounting clip (5) that surrounds the sunroof switch (3), if equipped.
- Lower the clip to release, then slide the console forward to remove.NOTE: On Low Line models the courtesy lamp lens serves as the forward retaining clip, Release the tab and lower the lens.
- Lower the overhead console (1) far enough to access the wire harness connectors.
- Disconnect the courtesy lamps (2 and 6), if equipped disconnect the infrared temperature sensor (4) and power sunroof switch electrical connectors.
- Remove the overhead console assembly from the vehicle.