LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Cellular Systems, Entertainment Systems & Navigation Systems (Service Information)) >> Radio >> Standard Procedure >> Radio Backup

Radio Backup

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The radio hard disk drive (HDD) can be backed up to save customer data in the event that a radio replacement is required. This procedure can only be done with all radios with a hard disk drive. All other radios do not have a HDD.

  1. Turn the ignition to RUN, engine OFF.
  2. Power on the external HDD.
  3. Connect the external HDD to the radio using the USB (Universal Serial Bus) cable. The radio display will change to the "Manage My Files" screen.
  4. Connect the scan tool and perform the following steps to place the radio into "Dealership Mode":
    • ECU View
    • Radio
    • Misc. Functions
    • Service Mode
    • Start
    • Next
  5. Follow the on screen instructions on the radio to back up the radio HDD.
scientia non olet · About LEMON Manuals