LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Power Windows (Service Information)) >> MOTOR, Window Regulator >> Removal >> Removal

MOTOR, Window Regulator: Removal: Removal

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the door trim panel. Refer to Body/Door - Front/PANEL, Door Trim - Removal .
  3. Disconnect the electrical connector.
  4. Remove the mounting fasteners and remove the motor.
scientia non olet · About LEMON Manuals