LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (1.8L Engine (Service Information)) >> Valve Timing >> TENSIONER, Engine Timing >> Installation >> Installation

TENSIONER, Engine Timing: Installation: Installation

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: TENSIONER RESET
GC0082466Courtesy of CHRYSLER LLC
  1. Reset timing chain tensioner (4) by lifting up on ratchet (2) and pushing plunger (3) inward towards the tensioner body (4). Insert Tensioner Pin 8514 into slot (1) to hold tensioner plunger in the retracted position.
    Fig 2: TIMING CHAIN TENSIONER
    GC0098680Courtesy of CHRYSLER LLC
    NOTE: Keep the slack in the timing chain on the tensioner side.
  2. Install timing chain tensioner (1) and tighten bolts to 12 N.m (105 in. lbs.).
  3. Remove timing Tensioner Pin 8514 (2).
  4. Install the engine timing cover. See Engine/Valve Timing/COVER(S), Engine Timing - Installation 
scientia non olet · About LEMON Manuals