Diesel Engine

WARNING: This page is about a different car, the 2009 Dodge Caliber. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before proceeding, see Steering - Warning .

Siphon as much fluid as possible from the power steering fluid reservoir.
Remove the engine appearance cover.

Fig 1: Removing/Installing Pressure Hose At Pump Pressure Port - Diesel Engine
Courtesy of CHRYSLER LLC
Remove the pressure hose routing bracket bolt (2) to the upper mount (7).
Remove the pressure hose (3) at the pump pressure port (4).

Fig 2: Removing/Installing Supply Hose At Power Steering Pump - Diesel Engine
Courtesy of CHRYSLER LLC
Remove the hose clamp (3) securing the supply hose (1) at the pump.
Remove the supply hose (1) from the pump (2).

Fig 3: Removing/Installing Power Steering Pump Mounting Bolts Through Pulley Openings - Diesel Engine
Courtesy of CHRYSLER LLC
Remove the drive belt. Refer to Cooling/Accessory Drive/BELT, Serpentine - Removal .
Remove the two pump mounting bolts (1) through the pulley (2) openings.

Fig 4: Removing/Installing Power Steering Pump Rear Mounting Bolt - Diesel Engine
Courtesy of CHRYSLER LLC
Remove the rear pump mounting bolt (2) behind the pump (1).
Remove the power steering pump (1).