LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 286 (Engine Controls - Checking For An Intermittent DTC, Pre-Diagnostic Troubleshooting Procedure, Pcm Verification Test & Pcm/TCM Programming) >> Standard Procedure >> Pcm / TCM Programming >> Section 3 - Authorized Modification Label

Section 3 - Authorized Modification Label

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The following step is required by law when reprogramming a PCM/ECM and/or TCM.

Type the necessary information on the "Authorized Modification Label" and attach near the VECI label.

Fig 1: AUTHORIZED MODIFICATION LABEL
GC0094476Courtesy of CHRYSLER LLC
  1. Powertrain Control / Transmission Control Module Part Numbers (Insert P/Ns) Used
  2. Change Authority: TSB XX--XX
  3. Dealer Code: XXXXX
  4. Date: XX-XX-XX