LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Memory Seat Module (MSMD) - Electrical Diagnostics >> Standard Procedure >> APS Verification Test >> Perform Adjustable Pedals System Verification Test

Perform Adjustable Pedals System Verification Test

  1. Make sure all accessories are turned off and the battery is fully charged.
  2. Make sure all wiring and components are connected.
  3. If the module or the pedal assembly was replaced, reprogram the Adjustable Pedals hard stop.
    • Move the Adjustable Pedals to full forward and continue to apply the switch for 10 seconds to learn the hard stop.
    • Repeat for the rearward direction.
  4. Verify the Adjustable Pedals System is disabled with the shift lever in reverse and with the speed control engaged.
  5. With the scan tool, clear DTCs in all modules.
  6. Move the Adjustable Pedals Switch forward and rearward several times.
  7. Turn the ignition off for five seconds, then turn the ignition on.
  8. Using the scan tool, select view DTCs in all modules.

    Are there any DTCs present?

    Yes 

    • Repair is not complete. For the diagnostic procedure, refer to DIAGNOSTIC information for the appropriate module.

    No 

    • Repair is complete.
scientia non olet · About LEMON Manuals