MODULE, Steering Column Control: Removal: Removal: Disassembly

WARNING: This page is about a different car, the 2009 Dodge Avenger and 2009 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: There is no need to disassemble the Steering Column Control Module (SCCM) if only removing the SCCM from the column.

Fig 1: Identifying Left Stalk Retaining Screw

Courtesy of CHRYSLER LLC

Remove the left multi-function switch stalk retaining screw (2).
Pull the left stalk out of the SCCM.

Fig 2: Left Stalk Electrical Connector
Courtesy of CHRYSLER LLC
Disconnect the left stalk electrical connector.
Separate the left switch from the SCCM.

Fig 3: Right Multi-Function Switch Retaining Screw
Courtesy of CHRYSLER LLC
Remove the one right multi-function switch retaining screw.
Pull right switch out of SCCM.

Fig 4: Right Stalk Electrical Connector
Courtesy of CHRYSLER LLC
Disconnect the right switch electrical connector.