LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Touring, 2D Convertible, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Electronic Control Modules (Service Information)) >> Electronic Control Modules - Service Information >> Module - Powertrain Control >> Removal >> Module - Powertrain Control

Module - Powertrain Control

WARNING: This page is about a different car, the 2008 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PCM Location
GC0000028Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
  2. Raise vehicle and support.
  3. Remove the left front wheel.
  4. Remove the left front splash shield.
    Fig 2: PCM Assembly
    GC0000030Courtesy of CHRYSLER LLC
  5. Unlock and remove the 4 connectors. See Fig 1.
  6. Remove the 3 mounting screws. See Fig 2.
  7. Remove the PCM.
scientia non olet · About LEMON Manuals