LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (Ignition Control (Service Information)) >> CAPACITOR, Ignition >> Installation >> 2.7L 2nd

2.7L 2nd

WARNING: This page is about a different car, the 2009 Dodge Avenger and 2009 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: 2nd Ignition Capacitor - 2.7L
GC0080070Courtesy of CHRYSLER LLC
  1. Install ignition coil capacitor (2) and bolt (1).
  2. Tighten bolt to 28 N.m (20.5 ft. lbs.).
  3. Connect electrical connector (3).
  4. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals