LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Air Injection >> Tube - Air Pump Inlet >> Removal

Tube - Air Pump Inlet: Removal

Fig 1: AIR INLET TUBE AT MAF
GC0072830Courtesy of CHRYSLER LLC
  1. Cut the tie straps (3) being careful not to damage the air inlet tube (4).
  2. Remove the constant tension clamp (2) and remove the mass air flow (MAF) sensor (1) from the air inlet tube (4). Position MAF sensor (1) and wiring aside.
    Fig 2: AIR INLET TUBE AT AIR PUMP
    GC0072825Courtesy of CHRYSLER LLC
  3. Remove air inlet tube (3) by pushing the ends (1) together, while pulling the air inlet tube (3) away from air pump housing connection (2).
scientia non olet · About LEMON Manuals