LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection-Gasoline >> Sensor - Inlet Air Temperature >> Removal

Sensor - Inlet Air Temperature: Removal

Fig 1: AIR TEMPERATURE SENSOR
GC0072442Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable.
    NOTE: Clean dirt from sensor area prior to removal from air box.
  2. Disconnect the inlet air temperature sensor electrical connector (1).
  3. Remove the inlet air temperature sensor (2) from the air box (3) by turning the sensor 1/4 turn in the counter - clockwise direction.
scientia non olet · About LEMON Manuals