LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Delivery-Gasoline >> Sensor - Fuel Level >> Removal >> Flex Fuel

Flex Fuel

Fig 1: FLEX FUEL LEVEL SENSOR
GC0072428Courtesy of CHRYSLER LLC
  1. Remove fuel pump module, see INSTALLATION .
    NOTE: Mark the position of the fuel level sensor on the fuel pump module housing prior to removing. The correct position of the wires are critical to proper operation of the fuel level sensor. Mark the position of the wire prior to removing.
  2. Use a terminal removal tool and remove negative electrical wire (3) from fuel level sensor.
  3. Remove positive electrical wire (4) from fuel level sensor.
  4. Remove fuel level sensor retaining tabs (1) from fuel pump module housing (2).
scientia non olet · About LEMON Manuals