LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery-Gasoline >> Sensor - Fuel Level >> Installation >> Flex Fuel

Flex Fuel

Fig 1: FLEX FUEL LEVEL SENSOR
GC0072428Courtesy of CHRYSLER LLC
NOTE: Correctly position the fuel level sensor to the fuel pump module housing, using the mark made during the removal procedure. Correctly install the positive and negative electrical wire to the fuel level sensor.
  1. Correctly position fuel level sensor retaining tabs (1) to fuel pump module housing (2). Press to lock the fuel level sensor into place on the fuel pump module.
  2. Install positive electrical wire (4) to fuel level sensor.
  3. Install negative electrical wire (3) to fuel level sensor.
  4. Install fuel pump module, see INSTALLATION .
scientia non olet · About LEMON Manuals