LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Base, 2D Convertible, 2.4 J >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Outlet >> Removal

Power Outlet: Removal

Fig 1: 9857 Power Outlet Remover
GC0059333Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Using special tool 9857 Power Outlet Remover. Insert the tool with tips against bosses.
  3. Pull out the base through mounting ring by gently rocking pliers.
  4. Disconnect the base wires.
scientia non olet · About LEMON Manuals