LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.8L Engine (Service Information)) >> Engine Mounting >> Mount-Upper Engine >> Installation >> Upper Engine Mount

Upper Engine Mount

WARNING: This page is about a different variant/trim than selected.
Fig 1: Upper Engine Mount
GC0002171Courtesy of CHRYSLER LLC
  1. Install engine bracket (if removed). Tighten bolts to 33 N.m (24 ft. lbs.).
  2. Position the upper engine mount and install frame rail to mount bolts. See Fig 1. Tighten bolts to 68 N.m (50 ft. lbs.).
  3. Install the mount to engine bracket bolts and tighten to 54 N.m (40 ft. lbs.). See Fig 1.
  4. Remove jack from under engine.
  5. Install air cleaner housing and element.
scientia non olet · About LEMON Manuals