LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Pacifica Limited, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (3.8L Engine (Service Information)) >> Engine Block >> FLEXPLATE >> Installation >> Flex Plate

Flex Plate

WARNING: This page is about a different variant/trim than selected.
Fig 1: Flex Plate, Bolt And Backing Plate
GC0061126Courtesy of CHRYSLER LLC
1 - FLEX PLATE
2 - BOLT (QTY. 8)
3 - BACKING PLATE
  1. Position flex plate with backing plate (3) on the crankshaft.
  2. Apply Mopar® Lock & Seal Adhesive to the flex plate bolts (2).
  3. Install flex plate bolts (2). Tighten bolts to 95 N.m (70 ft. lbs.).
  4. Install the transmission. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals