LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Throttle Body >> Installation >> Throttle Body

Throttle Body

Fig 1: Removing/Installing Throttle Body
GC0032363Courtesy of CHRYSLER LLC
  1. Connect the PCV hose (1) to the throttle body (5).
  2. Install the throttle body (5) and gasket to engine.
  3. Install the PCV hose bracket and throttle body retaining bolts. Tighten to 20 N.m (15 ft. lbs.).
  4. Connect the throttle body harness connector (3).
  5. Install the throttle body inlet tube.
  6. Install the engine cover. Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.
    NOTE: To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals