LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire 2D Convertible, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension System >> Wheel Alignment >> Standard Procedure >> Check And Adjust Rear Axle Toe

Check And Adjust Rear Axle Toe

Fig 1: Locating Cam Bolts For Adjusting Rear Axle Toe
GC0033635Courtesy of CHRYSLER LLC
  1. Check the vehicle level at the front and rear axles and adjust if necessary. See CHECKING VEHICLE LEVEL .
  2. Check the vehicle level at the front and rear axles with an electronic inclinometer and adjust if necessary. See INSPECTING AND ADJUSTING USING ELECTRONIC INCLINOMETER .
  3. Adjust the toe with the cam bolt on the mounting of the left and right tie rod on rear axle carrier.
scientia non olet · About LEMON Manuals