LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> 300 SRT-8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Power Windows (Service Information)) >> Power Windows >> Window Regulator Module >> Diagnosis And Testing >> Window Regulator Module

Window Regulator Module

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Any diagnosis of the Window Regulator Modules should begin with the use of the scan tool. For information on the use of the scan tool, refer to the appropriate Diagnostic Service Information. 

For complete circuit diagrams, refer to SYSTEM WIRING DIAGRAMS article.

WARNING: Disable the airbag system before attempting any steering wheel, steering column, seat belt tensioner, side airbag or instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury.