LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> 300 Limited, RWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor - Map >> Installation >> Sensor - Map - 6.1L

Sensor - Map - 6.1L

Fig 1: MAP Sensor Mounting - 6.1L
GC0039508Courtesy of CHRYSLER LLC
  1. Clean MAP sensor mounting hole at rear of intake manifold.
  2. Check MAP sensor o-ring seal (2) for cuts or tears.
  3. Position sensor (1) into intake manifold.
  4. Install two sensor mounting bolts (3).
  5. Connect electrical connector to sensor.
scientia non olet · About LEMON Manuals