Module, Fuel Pump: Installation: Fold-In-Floor

Be careful not to allow dirt/debris to fall into the fuel tank.

1. Wipe seal area of tank clean and place a new O-ring seal in position on pump.
2. Position fuel pump module in tank.
3. Tighten lock ring using special tool #9340 to install the lock ring. See Figure.
4. Install fuel tank. Refer to TANK, FUEL .
5. Lower vehicle.
6. Connect negative cable battery.
7. Fill fuel tank. Use the scan tool to pressurize the fuel system. Check for leaks.
8. Install fuel filler cap.