LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Town & Country Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Diagnostic Procedures - Introduction & Diagnostic Code Index >> System Description And Functional Operation >> Overhead Console >> Ambient Temperature Sensor

Ambient Temperature Sensor

The ambient air temperature is monitored by the PCM (gas) FCM (diesel) and displayed by the CT/CMTC/EVIC. The PCM (gas) FCM (diesel) receives a hardwire input from the ambient temperature sensor (ATS).

The ATS is a variable resistor that operates on a 5-volt reference signal circuit hardwired from the PCM (gas) FCM (diesel). The resistance in the ATS changes as the outside temperature rises or falls. The PCM (gas) FCM (diesel) senses the change in reference voltage through the ATS resistor. Based on the resistance of the ATS, the PCM (gas) FCM (diesel) is programmed to correspond to a specific temperature. The PCM (gas) FCM (diesel) stores and filters the ambient temperature data and transmits this data to the CMTC/EVIC via the PCI Bus. The ATS cannot be adjusted or repaired and, if faulty or damaged, it must be replaced.

scientia non olet · About LEMON Manuals