Fuel System Pressure Release Procedure

Fig 1: Removing/Installing Rear Seat

Courtesy of CHRYSLER LLC

Remove lower rear seat cushion.

Fig 2: Identifying Pump Module Cover
Courtesy of CHRYSLER LLC
Remove the fuel pump module cover.

Fig 3: Identifying Module Electrical Connectors
Courtesy of CHRYSLER LLC
Disconnect the electrical connector for fuel pump module.
Start and run engine until it stalls.
Attempt restarting engine until it will no longer run.
Turn ignition key to OFF position.
Disconnect negative battery cable.
One or more Diagnostic Trouble Codes (DTC's) may have been stored in PCM memory. The scan tool must be used to erase a DTC.