LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.7 R, Gas >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Inlet Air Temperature Sensor >> Installation >> Sensor-Inlet Air Temperature - 2.0/2.4L

Sensor-Inlet Air Temperature - 2.0/2.4L

Fig 1: Identifying Inlet Air Temperature Sensor Location
GC0055480Courtesy of CHRYSLER LLC

The sensor is in the clean air duct.

Fig 2: Identifying Inlet Air Temperature Sensor Orientation
GC0055481Courtesy of CHRYSLER LLC
  1. Install sensor. Make sure of sensor orientation.
  2. Attach electrical connector to sensor.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals