LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Suspension >> Arm-Upper Control >> Removal >> Upper Control Arm

Upper Control Arm

  1. Raise and support the vehicle. Refer to STANDARD PROCEDURE .
    Fig 1: Tire & Wheel Mounting
    GC0056932Courtesy of CHRYSLER LLC
  2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
    Fig 2: Identifying Rear Upper Control Arm Mounting
    GC0058669Courtesy of CHRYSLER LLC
  3. Remove the nut (3) and bolt (4) securing the upper control arm (5) to the knuckle.
  4. Remove the nut (2) and bolt (1) securing the upper control arm (5) to the crossmember.
  5. Remove the upper control arm (5).
scientia non olet · About LEMON Manuals