LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Suspension >> Link-Stabilizer >> Removal >> Stabilizer Link

Stabilizer Link

NOTE: Before proceeding, see WARNING .
  1. Raise and support the vehicle. Refer to STANDARD PROCEDURE .
    Fig 1: Tire & Wheel Mounting
    GC0056932Courtesy of CHRYSLER LLC
  2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
    Fig 2: Identifying Strut Mounting At Knuckle
    GC0052881Courtesy of CHRYSLER LLC
  3. While holding the stabilizer bar link (1) stud stationary, remove the nut (4) securing the link to the strut (3).
    Fig 3: View Of Stabilizer Link Mounting To Bar
    GC0058655Courtesy of CHRYSLER LLC
  4. While holding the stabilizer bar link (1) lower stud stationary, remove the nut (3) securing the link to the stabilizer bar (2).
  5. Remove the stabilizer bar link (1).
scientia non olet · About LEMON Manuals