LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front Suspension >> Link-Stabilizer >> Installation >> Stabilizer Link

Stabilizer Link

Fig 1: View Of Stabilizer Link Mounting To Bar
GC0058655Courtesy of CHRYSLER LLC
  1. Attach the stabilizer bar link (1) to the stabilizer bar (2). Install and tighten the nut (3) while holding the stabilizer bar link lower stud stationary. Tighten the nut to 48 N.m (35 ft. lbs.).
    Fig 2: Identifying Strut Mounting At Knuckle
    GC0052881Courtesy of CHRYSLER LLC
  2. Attach the stabilizer bar link (1) to the strut (3). Install and tighten the nut (4) while holding the stabilizer bar link stud stationary. Tighten the nut to 48 N.m (35 ft. lbs.).
    Fig 3: Tire & Wheel Mounting
    GC0056932Courtesy of CHRYSLER LLC
  3. Install tire and wheel assembly (1). Refer to INSTALLATION . Install and tighten wheel mounting nuts (3) to 135 N.m (100 ft. lbs.).
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals