LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (3.5L Engine (Service Information)) >> Engine Mounting >> Mount-Right >> Removal >> Engine Mount - Right

Engine Mount - Right

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Right Engine Mount (V6)
GC0060236Courtesy of CHRYSLER LLC
  1. Remove Power Steering Fluid Reservoir and set aside. Refer to REMOVAL .
  2. Disconnect the ground strap
  3. Support the engine with a block of wood and a suitable jack.
  4. Remove 3 engine mount bracket bolts (1).
  5. Remove 2 engine mount bracket nuts (2)
  6. Remove engine mount bracket. (3).
  7. Remove 2 engine mount bolts (5).
  8. Remove engine mount (4).
scientia non olet · About LEMON Manuals