LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Electronic Control Modules (Service Information)) >> Module-Transmission Control >> Operation >> Transmission Control Module >> Inputs and Outputs

Inputs and Outputs

WARNING: This page is about a different car, the 2007 Jeep Patriot and 2007 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Item - Shift Control Line Pressure Control Selection Control Lock-up Control CAN Communication Control Fail-safe Function (Note 1)
Input Engine speed signal - X X X X X
Accelerator pedal position signal X X X X X X
Closed throttle position signal X - - X X -
Stop lamp SW signal X X - X X X
Primary pressure sensor - X - - - -
Secondary pressure sensor - X X - - X
Fluid temperature sensor X X X X - X
Primary speed sensor X X - X - X
Secondary speed sensor X X x X - X
PNP switch X X X X - X
Output Line pressure solenoid value - X x - - X
Secondary pressure solenoid value - X X - - X
Lock-up solenoid value - - X X - X
Lock-up/Selection switching solenoid value - - X X - X
Stepping motor X - - - - X