LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 ((Transmission Control Module (TCM) - Electrical Diagnostics - GETRAG MPS6 Transmission)) >> DTC Troubleshooting >> P284E-Shift Fork 2 UNREQUESTED Movement >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK THE TRANSMISSION CONTROL MODULE 

    Repair 

    • Check the transmission internal gearing for proper tolerances and operation concerning all shift forks and there respective components. If no problems are found, using the schematics as a guide, check the Transmission Control Module (TCM) terminals and connectors for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. Check the Service Information Bulletins for any possible causes that may apply. If no problems are found, replace and program the Transmission Control Module Assembly (TCMA) in accordance with the Service Information.
    • Perform the MPS6 VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure 
scientia non olet · About LEMON Manuals