Programming Ignition Keys To The Skim
WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch on (transmission in park/neutral).
- Use the scan tool and select THEFT ALARM, SKIM then MISCELLANEOUS.
- Select PROGRAM IGNITION KEY'S OR KEY FOBS.
- Enter secured access mode by entering the vehicle four-digit PIN.NOTE: A maximum of eight keys can be learned to each SKIM. Once a key is learned to a SKIM it (the key) cannot be transferred to another vehicle.
- faulty ignition key transponder
- ignition key is programmed to another vehicle.
- Obtain ignition keys to be programmed from customer (8 keys maximum).
- Using the scan tool, erase all ignition keys by selecting MISCELLANEOUS and ERASE ALL CURRENT IGN. KEYS.
- Program all ignition keys.
8 Keys Already Learned, Programming Not Done - SKIM transponder ID memory is full.
Learned Key In Ignition - Ignition key transponder ID is currently programmed in SKIM memory.