LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Electronic Control Modules (Service Information)) >> MODULE, Engine Control >> Standard Procedure >> ECM/Skim/WCM Programming - Diesel >> PROGRAMMING THE ECM (Bosch)

PROGRAMMING THE ECM (Bosch)

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Read all notes and cautions for programming procedures.
  1. Connect a battery charger to the vehicle.
  2. Connect the StarSCAN®.
  3. Select "ECU View".
  4. Select "WCM Wireless Control Module".
  5. Select "Miscellaneous Functions".
  6. Select "PCM Replaced".
  7. Enter the PIN when prompted.
  8. Press "Next".
  9. Cycle the Key.
  10. Verify the repair.
scientia non olet · About LEMON Manuals