LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Electronic Control Modules (Service Information)) >> MODULE, Powertrain Control >> Installation >> 2.7L/3.5L (NGC)

2.7L/3.5L (NGC)

WARNING: This page is about a different car, the 2009 Dodge Avenger and 2009 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Separating/Attaching PCM At Bracket - 2.7L/3.5L
GC0120943Courtesy of CHRYSLER LLC
  1. Install the Powertrain Control Module (PCM) (2) to bracket (1). Tighten bolts (3) to 5 N.m (45 in. lbs.).
    Fig 2: Removing/Installing PCM - 2.7L/3.5L
    GC0120942Courtesy of CHRYSLER LLC
  2. Install the PCM and bracket (4) to vehicle.
  3. Install bolt (3) to lower shock tower fastener and tighten to 9 N.m (80 in. lbs.).
  4. Install nut (1) to upper shock tower stud and tighten to 9 N.m (80 in. lbs.).
  5. Connect the electrical connectors (2) to PCM.
  6. Install Air Cleaner Housing.
  7. Connect negative battery cable and tighten to 16.5 N.m (145 in. lbs.).
  8. Reprogram radio stations and time.
  9. Program the PCM. See Electrical - Electronic Control Modules/Electronic Control Modules - Standard Procedure .
scientia non olet · About LEMON Manuals