LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Electrical >> Gauges >> Message Center (Service Information) >> Message Center >> HOMELINK Transceiver >> Standard Procedure >> Erasing Transmitter Codes

Erasing Transmitter Codes

NOTE: Individual channels cannot be erased. Erasing the HomeLink® transceiver codes will erase ALL  programmed codes.

To erase programming from all three buttons (individual buttons cannot be erased but can be "reprogrammed"), follow the step noted:

  1. Press and hold the two outer HomeLink® transceiver buttons until the indicator light begins to flash-after 20 seconds. Release both buttons. Do not hold for longer that 30 seconds. HomeLink® is now in the train (or learning) mode and can be programmed at any time beginning with "Programming". See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals