Diagnostic Test

1) THROTTLE BODY INSPECTION
Turn the ignition on.

With a scan tool, read DTCs and record the related Freeze Frame data.

NOTE: This DTC sets in extreme cold ambient temperatures with the throttle plate stuck. By the time the vehicle gets to the dealership the condition may be corrected.

NOTE: P2110 will set with P2072. P2118 may also set and the customer will experience a Limp-in condition. If either of these two faults are set, it indicates that the ice blockage software has run and no repair is necessary.

NOTE: Diagnose any other DTCs that may also be set before continuing.

Turn the ignition off.

Remove the air cleaner assembly from the throttle body.

Check for any signs of a foreign material (ice or dirt) on the throttle plate or in the bore causing the throttle plate to stick.

Is the throttle blade still stuck because it is frozen?

Yes
1. Allow the throttle body to thaw naturally in a room temperature climate.
2. Perform PCM VERIFICATION TEST .
No
1. Test Complete.