LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Pacifica Limited, AWD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Shields-Heat >> Installation >> Heat Shield-Installation-Toe Board

Heat Shield-Installation-Toe Board

Fig 1: Toe Board Heat Shield
GC0049828Courtesy of CHRYSLER LLC
1 - NUTS
2 - TOE BOARD HEAT SHIELD
  1. Position toe board heat shield to underbody.
  2. Install heat shield nuts and tighten to 2.6 N.m (23 in. lbs.).
  3. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.
  4. Lower vehicle.
scientia non olet · About LEMON Manuals