Cross Over Pipe-Installation-3.8L
Courtesy of CHRYSLER LLC
| 1 - CROSS-OVER PIPE |
| 2 - BOLT |
| 3 - GASKET |
| 4 - FLAG NUT |
- Position cross-over pipe to the manifold connections.
- Position new gaskets and loosely install fasteners.
- Tighten fastener to 41 N.m (30 ft. lbs.).
- Install the cross-over support fastener. Tighten fastener to 41 N.m (30 ft. lbs.).
- Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
- Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.