Exhaust System: Muffler: Installation: Muffler-Installation

Fig 1: Muffler Components

Courtesy of CHRYSLER LLC

1 - CATALYTIC CONVERTER/EXHAUST PIPE

2 - BAND CLAMP

3 - MUFFLER AND RESONATOR ASSEMBLY

4 - MUFFLER

1. Install band clamp (2) onto muffler (4) and position muffler (4) into muffler and resonator assembly (3).
2. Position band clamp (2) onto muffler (4) and position muffler (4) into catalytic converter/exhaust pipe (1).
3. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.
4. Tighten band clamp nuts to 54 N.m (40 ft. lbs.).
5. Lower the vehicle.
6. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.