LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Pacifica Base, 4.0 X >> Repair and Diagnosis >> Electrical >> Gauges >> Overhead Console (Service Information) >> Overhead Console - Service Information >> HOMELINK Transceiver >> Standard Procedure >> Erasing Transmitter Codes

Erasing Transmitter Codes

NOTE: Individual channels cannot be erased. Erasing the HomeLink® transmitter codes will erase ALL programmed codes.

To erase programming from the three buttons (individual buttons cannot be erased but can be "reprogrammed"), follow the step noted:

  1. Press and hold the two outer HomeLink® buttons until the indicator light begins to flash and the instrument cluster displays "Channels Cleared" (after 20 seconds). Release both buttons. Do not hold for longer that 30 seconds. HomeLink® is now in the train (or learning) mode and can be programmed at any time beginning with "Programming". See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals