LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Pacifica Base, 3.8 L >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L Engine (Service Information) >> Engine Mounting >> Mount-Left >> Installation >> Left Mount

Left Mount

Fig 1: Engine Mount to Bracket Alignment
GC0002173Courtesy of CHRYSLER LLC
1 - ENGINE MOUNT STUD
2 - ALIGNMENT HOLE
  1. Align engine mount to bracket and tighten upper engine mount fastener to 101 N.m (75 ft.lbs.). See Fig 1.
    Fig 2: Left Engine Mount & Bracket
    GC0002172Courtesy of CHRYSLER LLC
    1 - UPPER ENGINE MOUNT BRACKET FASTENER
    2 - ENGINE MOUNT BRACKET
    3 - ENGINE MOUNT
    4 - ENGINE MOUNT FASTENER
  2. Install the engine mount with bracket into position and hand tighten the upper engine mount bracket fasteners. See Fig 2.
  3. Raise and support the vehicle.
  4. Install the left engine mount bracket lower fasteners. Tighten the fasteners to 68 N.m (50 ft.lbs.).
  5. Remove the jackstand.
  6. Install the engine mount to cradle fastener. Tighten the fastener to 101 N.m (75 ft.lbs.).
  7. Lower the vehicle.
  8. Tighten the upper engine mount bracket fasteners to 101 N.m (75 ft.lbs.).
  9. Install the starter. Refer to INSTALLATION .
  10. Install the left exhaust manifold. See INSTALLATION .
  11. Install the radiator fan assembly. Refer to INSTALLATION .
  12. Install the cruise control servo.
  13. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals