LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Pedal-Accelerator >> Installation >> Accelerator Pedal

Accelerator Pedal

Fig 1: Accelerator Pedal & Throttle Cable
GC0021652Courtesy of CHRYSLER LLC
  1. Position accelerator pedal assembly on dash panel. Install retaining nuts. Tighten retaining nuts to 12 N.m (105 in. lbs.) torque.
  2. Place cable through slot in top of pedal shaft.
  3. While holding pedal lever, Push retainer clip forward in vehicle engaging it into the pedal lever.
  4. Hold the throttle body lever in the wide open position and install the throttle cable.
scientia non olet · About LEMON Manuals