LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Limited, 2D Coupe, Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Distribution >> Relay Control Module >> Installation >> Installation - Relay Control Module

Installation - Relay Control Module

Fig 1: Locating Clip
GC0035892Courtesy of CHRYSLER LLC
  1. Install the relay control module harness connectors to the relay control module (1).
  2. Install the relay control module into the control module box, pushing the relay control module down until the clips snap into place.
  3. Install the control module box lid.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals