LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Battery System) >> Battery System >> Battery-Starter-Absorbent Glass Mat >> Standard Procedure >> Checking Battery Electrolyte Level

Checking Battery Electrolyte Level

WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Battery Caps
GC0037485Courtesy of CHRYSLER LLC
NOTE: Electrolyte levels for Absorbent Glass Mat (AGM) batteries should be checked every 25,000 miles or every two years.
  1. Remove the battery cell caps (1).
  2. Look through the battery cap holes to determine the level of the electrolyte in the battery (2). The electrolyte should be approximately 1 centimeter above the battery plates or until the hook inside the battery cap holes is covered.
    Fig 2: Hook Inside Battery Cap Holes
    GC0037486Courtesy of CHRYSLER LLC
  3. Add only distilled water until the electrolyte level is approx. one centimeter above the plates (2).