4D82-Steering Angle Sensor/Dynamics Correlation: Notes
WARNING: This page is about a different car, the 2007 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
For complete wiring diagrams refer to SYSTEM WIRING DIAGRAMS article.
- When Monitored:
With ignition on, but not if a checksum failure of the stored offset values is detected.
Or, a CAN time-out failure is detected.
Or, a failure is detected by the Steering Angle Sensor.
- Set Condition:
If the Anti-Lock Brakes Module has determined that the calculated sensor offset is too great or that it's calculated steering angle consistently does not match the steering sensor reported angle.
| Possible Causes |
|---|
| VEHICLE DAMAGE |
| STEERING COLUMN / INTERMEDIATE SHAFT DAMAGE |
| STEERING WHEEL ALIGNMENT |
| STEERING ANGLE SENSOR LOOSE |
| STEERING ANGLE SENSOR IMPROPERLY INSTALLED (WRONG MOUNTING POSITION) |
| STEERING ANGLE SENSOR |
| ANTI-LOCK BRAKE MODULE |